Embedded Files
LIGHTING SYSTEM
LIGHTING SYSTEM
To turn the lights on use the lighting panel according to the presets listed on the wall [FIG 1].
AUDIO/VIDEO SYSTEM
AUDIO/VIDEO SYSTEM
If the system is not already on, flip the "SYSTEM ON/OFF" switch and wait approximately 1 minute for everything to power on [Fig. 2].
To play audio or video through the system, press the correct button on the switcher [Fig. 2].
#1 = DVD player
#2 = ________
#3 = HDMI cable on-stage for a podium laptop
#4 = Building Live Feed from the Auditorium
#5 = HDMI cable at the booth for a laptop
#6 = Booth Desktop Computer
NOTE: always press #4 when leaving the room so the digital signage is displayed on the TV in the East Entrance Lobby
To control the volume of sound, make sure the tablet has the soundboard app opened:
Click Mixing Station app icon and choose xm32 [Fig. 3].
Click Connect [Fig. 4].
*If the mixer is open but you can’t control the sound, click the 3 dots in the upper right menu and click DISCONNECT. Then start the process over to re-connect.
Press the CHAPEL SCENE button, then use the fader on the corresponding channel that you need. (ex. Video or Talk 1) [Fig. 5].
Make sure MUTE is dim so you know the channel is “ON”. If mute is bright, the channel is muted.
Turn the projector ON using the remote labeled “projector” (point it at the lens of the projector and press the “ON” button) [Fig. 6].
Turn the projector OFF using the remote labeled “projector” (point it at the lens of the projector and press the “OFF” button 2 times).
*Always remember to turn off the TVs/Projectors/Sound Systems that you use*
FIGURES
FIGURES
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Page updated
Report abuse